Nha Khoa Tổng Quát·7 min read·Bs. Trần Thị Xuân Hương

How many steps are involved in getting removable dentures? The 3-session process at Dental Fam.

Making removable dentures involves 6 steps, typically completed in 3 appointments: 1st appointment: initial examination and impression taking; 2nd appointment: fitting and final impression taking; 3rd appointment: delivery and adjustments. Dental Fam uses digital impression taking with the TRIOS intraoral scanner, and thanks to our in-house lab, the fastest denture making time is only 2 hours, while many other dental clinics take 2 to 3 days. The cost of making the denture is all-inclusive; there are no additional charges for adjustments after fitting.

This article goes through the 6 steps, comparing digital impression taking with the traditional method, explaining why denture making is faster, and outlining the content of each appointment. First, the entire process.

How many steps are involved in getting removable dentures? The 3-session process at Dental Fam.

What are the steps in the removable denture fitting process?

The process consists of 6 steps: examination and consultation, oral treatment, impression taking and occlusion recording, fitting, completion and fitting of the dentures, and care instructions. The table below shows what the dentist does at each step:

Laboratory Complete the denture, the dentist installs and adjusts it, and checks the fit and bite.

Step Step Name What the Dentist Does
1 Examination and Consultation General examination, CT scan or X-ray if needed. Assessing teeth, gums, jawbone, and choosing the right denture for you
2 Oral Treatment Treatment of cavities, gingivitis, periodontitis, or extraction of non-preservable teeth (if needed)
3 Taking impressions and recording the occlusion Taking impressions using a TRIOS scanner to create an accurate model of the denture, from which the denture is designed
4 Try-on dentures Checking tooth position, occlusion, and aesthetics
5 Completion and fitting of dentures
6 Care Instructions Instructions for removing, cleaning the denture and teeth, and schedule for regular dental check-ups

In step 1, you will choose the denture base and the type of teeth with your dentist. If you want to learn more beforehand, you can read the article on which type of removable denture is best. Step 3 is where Dental Fam differs from many other places, so let's look at it in more detail.

How ​​is digital dental impression taking different from traditional impression taking?

Digital impression taking uses an intraoral scanner to create a 3D image of the jaw, instead of the traditional method of holding a tray of powdered or rubber material in your mouth.

With the traditional method, you hold a tray of material in your mouth until it hardens to create a mold of your teeth and gums. Dental Fam uses a TRIOS intraoral scanner, a device that scans directly in the mouth to create a digital 3D model of the jaw. The table below compares two methods according to the clinic's equipment documentation:

<

The TRIOS machine is not only for removable dentures. The clinic also uses it to design crowns, veneers, bridges, and implants, support clear aligner orthodontics, and simulate treatment results for easier visualization. If you want to understand the role of this step in all types of restorations, you can read the article ""What is dental impression taking for?"".

Where does the scanned data go and how long does it take to create the finished set? The answer lies in your appointments.

What is done at each appointment and how long does it take?

Typically, if everything goes smoothly, you will need 3 appointments in about a week, each lasting approximately 30 to 45 minutes. The table below shows the steps for each appointment:

Criteria Traditional Impression Taking Digital Impression Taking using TRIOS Scanner
ProcedureHolding a tray containing powdered or rubber material in your mouth Scanning directly in the mouth, no impression material needed
Sensation Material may cause discomfort No traditional materials causing discomfort
Results Material mold Sharp 3D images, high accuracy
Time Depending on material setting time Fast scanning, saving treatment time
Send to lab Transfer mold to lab Direct connection to modern CAD/CAM lab
Storage Physical mold Save and track digital treatment data
Appointment Action Time
Appointment 1 General examination (CT scan, X-ray if needed), the doctor will provide a treatment plan during this appointment and take initial impressions using a TRIOS scanner. Approximately 30 to 45 minutes for initial impression taking.
Appointment 2 Try on teeth and taking impressions. Finally Approximately 30 minutes
Session 3 Dental Delivery and Adjustment Approximately 30 minutes

The number of sessions and time may vary depending on the extent of tooth loss and the type of denture you choose. If you need more details about the time, you can check the article on how long removable dentures take. The denture making process itself is much faster than average.

Why is denture making faster at Dental Fam?

Thanks to our in-house lab with professional technicians and state-of-the-art equipment, denture making at Dental Fam takes a minimum of just 2 hours.

Many other dental clinics usually take about 2 to 3 days with 2 appointments: the first for taking impressions, and the second for fitting and fitting. In-house lab means the lab is located right in the clinic, so your impressions don't need to be sent elsewhere and then returned. Combined with the TRIOS scanner directly connected to the lab, the dentures are made on-site by professional technicians.

Although the process can take 2 hours, the clinic will usually schedule you for the next day so you don't have to wait and can attend to other matters. Appointments still include fitting and adjustments as shown in the table above.

Before making dentures, sometimes oral treatment is necessary.

Is oral treatment necessary before making dentures?

Yes, if you have cavities, gingivitis, periodontitis, or teeth that cannot be preserved, as the dentist needs to address these issues before making dentures.

For cases requiring treatment, the dentist usually performs it during the first appointment. Initial impression taking may be done during that same appointment or postponed to a later date, depending on your health and pain tolerance. Dental treatment costs are calculated separately, while the 100,000 VND consultation fee is waived if you get your dentures made immediately.

Additionally, if your jawbone has protruding or sharp points that cause pressure when wearing the dentures, the dentist may recommend minor surgery to reduce that area. This is not mandatory, and removable dentures usually do not require surgery.

Even after the dentures are finished, you're not completely done.

Will I need multiple adjustments after receiving my dentures?

Yes, because removable dentures often require multiple adjustments to fit the soft tissues in your mouth, and these adjustments are free.

The cost of making the dentures is all-inclusive, with no hidden fees, including any return visits for adjustments. Once the dentures are stable, you don't need separate follow-up appointments; you only need to visit the clinic if you have any problems that require the dentist's attention. During use, you need to remove the dentures for cleaning after each meal and before going to bed. Detailed instructions are available in the article on how to clean dentures.

If you have any further questions, the section below may help.

Frequently Asked Questions about Removable Dentures

Does getting removable dentures require surgery?

Usually not, as removable dentures do not require surgery.

Only if the jawbone has protruding or pointed areas causing pressure will the dentist recommend minor surgery to grind down that part, and this is not a mandatory procedure.

Do I need to take impressions for removable dentures twice?

Yes, you will take initial impressions at the first appointment and final impressions at the second appointment, after trying on the dentures.

Both appointments are done using an intraoral scanner, so you don't need to wear a tray of material like with traditional impression taking.

Do I need regular follow-up appointments after getting my dentures?

You don't need separate follow-up appointments for your dentures; just visit the clinic when you have any problems.

Your dentist will still guide you through the general oral care schedule. If your dentures become loose or have problems after fitting, you should return for the dentist to address them.

Making removable dentures involves 6 steps, usually 3 appointments: initial examination and impression taking, fitting and final impression taking, denture delivery and adjustments. Dental Fam uses a TRIOS scanner for impressions, eliminating the need for traditional impression materials, and with our in-house lab, dentures are made as quickly as 2 hours, usually on the next day. The cost is all-inclusive, with no additional adjustments.

All dentists at Dental Fam can make removable dentures. This article is based on the clinic's actual procedures and dentist consultations. You can view an overview of our services on our removable denture page.

Because everyone has different tooth loss situations, the surest way is to have a dentist examine you and give you a plan right away. You can schedule an appointment and consultation at Dental Fam; the 100,000 VND consultation fee is waived if you get dentures made immediately.

Dental Fam - Family Clinic

  1. Address: NOTT 28, 29, 30, Phuoc Long A Urban Area, Nha Trang, Khanh Hoa
  2. Business Hours:
  • Monday to Saturday: 8:00 AM to 6:00 PM;

  • Sunday: 8:00 AM to 12:00 PM

  1. Hotline: +84 582 582 345 / +84 983 001 768
  2. Email: info@dentalfam.vn
Z